Precision Pipe Fitting

All directional Seismic Snubber consists of interlocking steel members restrained by a one piece molded neoprene bushing. Bushing shall be replaceable. A minimum air gap of 3mm incorporated in the snubber design in all directions before contact is made between the rigid and resilient surface. Snubber end caps are removable to allow inspection of internal clearances. Neoprene bushings shall be rotated to insure no short circuits exist before systems are activated.

Style SSZ Snubbers are all directional double acting type with interlocking steel members restrained by Neoprene Shock Absorbing Element having physical and non-ageing properties to match the life of the installations. They are structurally very sound. All contact surfaces are resilient with non- linear stiffness characteristics & are sufficiently thick to allow adequate time for deceleration down to desirable level special feature of Style SSZ snubber is removable resilient element for checking if physically damaged accidentally Earthquake is not just a single jolt but an input of random frequencies at different accelerating levelsMounted pieces of equipment can be completely damaged even fly off if not fully protected against earthquake. All directional Seismic Snubber will provide safety in vertical, two horizontal modes as well as in the three rocking modes. Snubbers will also take care of errors in alignment and / minor shifting

Applications:

• Air Handling Units,
• Air Conditioners,
• Blowers, Bases,
• Condensers,
• Chillers,
• Cooling Towers,
• Compressors,
• Fans,
• Fan Coil Units,
• Motors, Packaged Units,
• Piping,
• D.G. Sets

• Delivery Time: 4 weeks